ford puma stline x - balljoints

Honest John Back Room » Technical matters
View Threaded
Wed 6 Mar 2024 17:42
ford puma stline x - balljoints - g1zm0

I've a wishbone balljoint that isn't coming out , I've whacked it with hammer with hub jacked up but , still nothing , hub isn't attached to anything except driveshaft .

I balljoint splitters won't work on ut , since the taper is enclosed in the buckle.

also I've a inner tierod I need to replace since it's bent. I've tried to take end off , but the nut just spins , how's best to tackle this

Reply | Report as offensive | Link
Wed 6 Mar 2024 18:34
ford puma stline x - balljoints - elekie&a/c doctor
Fit a complete new wishbone with ball joint . Release the rubber boot on the rack to hold the steering gear .
Reply | Report as offensive | Link
Thu 7 Mar 2024 01:40
ford puma stline x - balljoints - edlithgow

Maybe one of these might be useful

www.ebay.co.uk/itm/355248615339

A "Wishbone Lever Extractor Ball Joint Bottom Arm Control Suspension Pry Tool"

AKA "Hockey Stick"

Never used one, but they have featured in some South Main Auto repair videos.

MIGHT be improvisable, or they are about 30 quid with free postage.

Edited by edlithgow on 07/03/2024 at 01:43

Reply | Report as offensive | Link